We all need that caffeine hit from our first cup of coffee in the morning. Almost of us need at least a couple more cups during the day to keep us going. Especially it happens during those long, hectic afternoons.

The most critical factor for a good cup of coffee from your coffee machine is the condition the device is in. A dirty or rusty machine can work efficiently. But it can negatively influence the taste of your coffee. Let’s take a look at how to remove rust from the coffee pot’s hotplate.

1. How coffee makers work

At some point, you may have wondered how your coffee machine works. The process is much simpler than it seems. The coffee makers sometimes know as appliances.

How to remove rust from coffee maker hot plate

There are different types and models of coffee machines. All of them make for using with different brewing principles.

Today, in most coffee machines, the ground coffee is taking place in a paper or metal filter inside a funnel. Those funnels are now setting over a ceramic or glass coffee pot. Before the process, the cold water needs to add to its separate container to boil and then moves to a funnel.

2. Three Main Features

You will notice three main features when you remove the lid from your coffee machine:

a) A tank fills the water that pours into the machine at the beginning of the coffee-making process. There is also a hole in the bottom of the bucket that an orange tube moves through.

b) A white tube that goes up from under the base of the tank. This tube carries hot water to the drip area.

c) A kind of shower head to which water reaches through the white tube. Then the water comes out of the shower head and spraying over the coffee grounds. In some coffee makers, the water doesn’t use the tube. Instead it uses the shower head into a perforated disc known as a drip area.

Coffee maker manufacturers always want to make it as simplify and refine as they can. They want their designs become user friendly as possible. For more handy, you may notice your coffee maker has a heating element on the left side of the base.

3. Remove rust from the hot plate of your coffee maker

We’ve compiled some simple remedies for when you find rust on your coffee maker’s hotplate. Are here:

A. White vinegar

White vinegar is highly acidic. So, therefore it makes an excellent rust remover, with the added bonus of being easy to get. Most people have some in their pantry or kitchen.
Start by unplugging the coffee machine and removing the coffee maker. Then, soak a clean cloth in white vinegar.

Next, you need to let the cloth sit on the hot plate of the machine to remove the rust. Once this process is at the edge, you need to clean the hot plate of the coffee maker with a cloth or paper towel.

B. Foil

To remove rust from your coffeemaker’s hotplate, you should use aluminum foil. It’s cheap, simple, and reliable. On a chemical basis, it reacts with rust and is smoother than other materials. So it is unlikely to scratch your machine.

You will need to tear a strip of aluminum foil and dip it in some clean water. Once the foil is wet, roll it up and rub it against the rusted areas of the hot plate.

If the aluminum foil dries out, simply dip it back into the water or dip a new piece of paper in the same water. Clean the removed rust with a little soapy water and a sponge, then rinse and dry the heating plate.

C. Oxalic acid

Oxalic acid is a multi-purpose cleaning product that most people have in their homes. It is capable of removing rust from kitchen countertops, pipes and sinks effectively.

To begin, mix one part oxalic acid with nine parts water and let the mixture sit for 30 minutes. Then, using an old rag, clean the solution off the hot plate and repeat the process if possible.

4. How to prevent the hot plate of your coffee maker from rusting

We are all aware that prevention is preferable to cure. There are a few ways to save your coffee machine’s hot plate from rusting.

  • Always dry your coffee machine after each use.
  • Do not use the coffee maker to fill the water tank with water. Instead, use a large glass or pitcher.
  • Make sure no water drips once the brew cycle is complete.
  • Wipe the hot plate of the coffeemaker with a damp cloth. That damp cloth can remove any coffee residue after finishing the brew cycle.

5. Tips for using a coffee machine

There are a few things you can do to ensure you get the best possible cup of coffee, every time. The first, and as you may have guessed, the most important, is to keep your coffee maker clean.

The second is to always use a medium grind. Most automatic drip coffee machines are designing to use with a medium grind. But, the optimum grind may vary. Find what works for you.

Finally, always prepare a full pot. The reservoir and brew basket on your coffee machine are going to accommodate the maximum capacity of the machine. And anything less the process will cause the machine to run inefficiently.

Final Verdict:

Removing rust from your coffeemaker’s hot plate is not as difficult as it sounds. But it is a crucial step in making your coffee taste good. Follow the steps above and your brewing machine will be like new in no time.

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>